The versatility of Pneumatic high strain grouting pumps

เกจวัดแรงดันน้ำ4หุน is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the free rock mass. The most grain size can’t exceed 0.2 mm.
Grouting pump operation and upkeep is easy, protected and reliable. This pump is utilized in mines operating beneath troublesome circumstances because it’s dependable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it actually works
Pneumatic stress in the air cylinder exerts a excessive strain on the grout mixture which finally ends up in ejection of grout with a high strain and velocity. The valves of the air cylinder within the pump operate routinely to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be driven even without Electrical power supply in distant areas by using engine driven compressor.
The pump is majorly utilized in building and mining trade for injecting material into broad and medium size hole in beams, columns ,basement walls and flooring, lift shaft concrete wall fill-up etc. In mining business it is used to fill up cement resolution the place there’s a hole exists between construction and rock and for soil stabilization.
Detachable design tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing foundation, and other underground initiatives, and inflammable, explosive websites and different dangerous environment.
It has application in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be used at any site situation whether it’s rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the final amount of the grouting quantity is 8 or10 occasions of the amount to start with. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and flow may be adjusted according to the necessities of grouting,(The move of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).apart from, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electrical energy, development, mining etc. ground/underground development.
Mining Pneumatic Grouting pump has some great benefits of low power consumption, small vibration, low noise, small dimension, high efficiency, dependable efficiency, strain and flow management, lengthy life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can also be Light weight and with a wheelie design it may be carried simply. It is designed for straightforward operation and low upkeep. Last but not least its spare parts are easily out there.

Scroll to Top